User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference
- Introduction
- Performance Mode
- Browse Mode
- Capture Mode
- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
- F1 Preferences
- Index
The same Sample Slot parameter settings shown in the previous illustration are also visible here on the F1. The active pa-
rameters are orange.
With SHIFT held, the top row of pads will show if Keylock is enabled on each of the four Sam-
ple Slots. The same is true for FX, Monitor, and Punch.
To change the parameter status:
►
Just tap a pad while holding SHIFT.
Each time you press a pad, the parameter state (active or inactive) will be toggled. When you
release SHIFT, the Pad Matrix shows the contents of the current page of the Sample Grid.
4.2.12 Mute (STOP) Buttons
Below the F1's Pad Matrix is a row of buttons for muting and stopping Sample Slots.
The F1's Mute (STOP) buttons below the Pad Matrix.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 79