User Manual

er of Sample Slot 2 is halfway down in newly selected Remix Deck, the "full on" position of the
physical fader won't represent the actual value in the Remix Deck. In this case, the software
controls will snap to the position of their counterparts on the F1 once that you move those.
Which Deck Is the F1 Controlling When TRAKTOR Launches?
When you first launch TRAKTOR with your F1 connected, or when you connect an F1 while
TRAKTOR is already running, the F1 will indicate which Remix Deck it is currently set to con-
trol by the two ways described above. When launched, the corresponding 2x2 Pad Matrix quad-
rant will flash. To stop the flashing, just press any pad or button on the F1.
4.2.8 SHIFT Button
Pressing the SHIFT button along with another function button lets you access the secondary
functions.
The SHIFT Button.
The names of these functions appear just below the F1's buttons in grey letters. These secon-
dary functions will be explained in the following sections about the various buttons and pads
on the F1.
4.2.9 REVERSE (COLOR) Button
The primary function of the REVERSE (COLOR) button is, as its name implies, to access Re-
verse functions. The secondary function, Color mode (activated when SHIFT is pressed at the
same time), will be discussed in ↑4.6, Color Mode.
The REVERSE (COLOR) button.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 74