User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference
- Introduction
- Performance Mode
- Browse Mode
- Capture Mode
- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
- F1 Preferences
- Index
Assigning the F1 to a Different Remix Deck / Changing the Focus on the Controller
You can change the Remix Deck controlled by the F1 with the encoder knob:
►
Hold SHIFT and rotate the encoder knob.
Note that this is only possible if there are two or more Decks set to Remix Deck. When holding
SHIFT and rotating the encoder knob, the F1 indicates which Remix Deck is being controlled
in two ways:
• 7-segment display: The display shows the name of the controlled Deck by showing the let-
ter "d" followed by the letter of the Deck. For example, when controlling Deck C, "dC" will
be shown in the display. When controlling Deck D, "dd" will be shown.
• Pads: You can readily see which Deck is the controlled Remix Deck by glancing at the
F1's pads. The 16 pads are divided into four 2x2 squares. Each square represents a Deck.
The four upper-left pads, for example, indicate Deck A, the four upper-right show Deck B,
and so on. When you change the Deck assignment with the encoder knob, the quadrant
corresponding to the newly-selected Deck will begin to flash rapidly.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 72