User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference
- Introduction
- Performance Mode
- Browse Mode
- Capture Mode
- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
- F1 Preferences
- Index
• On the 7-segment Display, you will see the Quantize Values of a quarter-beat (sixteenth-
note) to 32 beats; when the Quantize Value is between 1 and 32 beats, only the numbers
will show on the display. For lower values, a decimal point appears at the upper left cor-
ner of the display followed by a number. For a half-beat (eighth-note) value, you'll see a
"2" preceded by a decimal point in the upper left corner of the display and for a quarter-
beat (sixteenth-note) value, a "4" preceded by a decimal point will be displayed.
• On the pads, you'll see a color pattern on the left half of the Pad Matrix (eight pads for
the eight possible values) with the current Quantize Value highlighted.
When you press and hold the QUANT (EDIT) button, the pad color pattern gives you an in-
tuitive way of seeing the Quantize Value: The first column of pads — from red to yellowish-
orange — represents the values that are less than one bar long. The second column — go-
ing from yellowish-green to green — show values that are one bar or longer.
Changing the Quantize Value
To change the Quantize Value of the Remix Deck with the F1, press and hold QUANT (EDIT)
for more than one second. The F1 will now display the current Quantize Value on both the
pads and on the 7-segment display (see above). While you continue to hold the QUANT (EDIT)
you can change the Quantize Value in either of two ways:
• Pads: The pads will show a color pattern corresponding to the Quantize Value. Pressing a
pad will select the value associated with that pad. The newly-pressed pad will become
bright, showing you that you have successfully changed the Quantize Value. You'll also
see the new value on the 7-segment display.
• Encoder: You can step through the different values by turning the encoder knob. As you
change values with the encoder knob, you'll also see the corresponding pads (representing
the Quantize Value) light up.
In addition to the visual feedback on the F1, you'll also see the Quantize Value on the
TRAKTOR software GUI.
►
Press and hold the QUANT (EDIT) button, and turn the encoder knob to change a Remix
Deck's Quantize Value.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 67