User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the TRAKTOR KONTROL F1!
- TRAKTOR KONTROL F1 Overview
- Tutorials and Workflows
- TRAKTOR KONTROL F1 Reference
- Introduction
- Performance Mode
- Browse Mode
- Capture Mode
- Selecting the Capture Source Deck
- Activating Capture Mode
- Setting the Capture Size
- The SYNC (MASTER) Button in Capture Mode
- Activating a Loop on the Capture Source Deck
- Loop Move and Beat Jump on Capture Source Deck
- Capturing a Sample into a Cell
- Auto-capturing a Sample
- Quick-Capturing Into a Cell
- Quick Auto-Capture
- Delete Mode
- Color Mode
- Type Mode
- Pitch Mode
- Size Mode
- Speed Mode
- Edit Mode
- MIDI Mode
- Sample Slot Parameters
- F1 Preferences
- Index
→
The Stem File is now playing back similar to a conventional track in a Track Deck. During
playback you will notice the Pads light up indicating the output level volumes of the
Stem Parts.
Adjusting Volumes of Stem Parts
To adjust the volumes of key elements from the music:
►
Move the four Slot Volume Faders downwards or upwards.
→
You will hear the several volumes of key elements change. According to the Volume fad-
ers’ positions and the resulting output volume, the Pads will display the current output
volume level.
Muting Stem Parts
To completely remove key elements from the music:
►
Press the STOP (MUTE) buttons.
→
The volumes of the Stem Parts will be completely removed from the music and the Pads
of the Stem Channel are dimmed.
Applying FILTER on Stem Parts
To apply the FILTER on Stem Parts:
►
Rotate the Filter knobs to apply the hi-pass or low-pass Filter to the Stem Channels.
→
You will hear the applied Filter on the Stem Channels output.
The usage of the Filter FX in combination with TRAKTOR’s EQ let you mix more precisely and
with more flexibility.
3.8.3 Applying FX SEND to Stem Channels
You can apply the FX of FX Unit 2 to any of the Stem Channels.
Tutorials and Workflows
Using F1 for Stem Deck Control
TRAKTOR KONTROL F1 - Manual - 56