User Manual

Tapping the QUANT (EDIT) button once will toggle the Quantization on/off.
►
Press and hold the SHIFT button, and then press the four Mute (STOP) buttons below the
Pad Matrix one by one to stop all Sample Slots and reset all playheads to the Sample
start positions.
3.4.4 Muting, and Tweaking Volume and Filter
To mute Sample Slots, and tweak volume and filter settings:
1. Hit all four pads in the third row (pads A3-D3). Note the pads are all blue on this page of
the tutorial Remix Set. All four sounds should be playing together.
2. Below the pads there are the orange Mute (STOP) buttons. They should all be lit up right
now because all of the slots are audible. Tapping on them will toggle them on or off, mut-
ing/unmuting the sound in the corresponding Sample Slots. Mute Sample Slots 1, 3, and
4 so that you can only hear the Sample playing in Sample Slot 2.
3. At the top of the F1, grab the second Filter knob and twist it slowly back and forth to pro-
duce filter sweeps.
4. Now unmute Sample Slot 3 by hitting its Mute (STOP) button, and then lower the Volume
fader.
5. Continue to unmute and adjust the filter and volume settings of the other Sample Slots.
→
Congratulations! You can now load Remix Sets, play them, and do some basic tweaking
as they are playing. Take some time and have fun tinkering with muting, and volume and
filter settings. You can load up to four Remix Sets at a time (one in each Deck) and prac-
tice switching around "on the fly."
Keep in mind that if you want the Remix Decks to play in sync, you'll have to designate a
master and then make sure the SYNC (MASTER) button is activated, so that each deck is
playing the same tempo and in phase.
In the next section, we'll see that there are some problems in our tutorial Remix Set that we'll
need to fix.
Tutorials and Workflows
First Steps With the F1
TRAKTOR KONTROL F1 - Manual - 33