Manual

▪ If you did not install the drivers on your computer, Windows will install the wrong
drivers.
▪ If you do not know whether or not you have previously installed the drivers of the
TRAKTOR KONTROL X1 to your computer, it is advisable to start the stand-alone in-
stallation (setup) program of the TRAKTOR KONTROL X1. If the setup program states
that it will first uninstall the drivers, you already have installed the drivers on your
computer. In this case you can connect the device to any other USB port, and Win-
dows will find the right driver when it installs the TRAKTOR KONTROL X1 on another
USB port.
7.3.2 Update the Driver
▪ Check the Native Instruments website regularly for updates of the TRAKTOR KON-
TROL X1 driver.
7.3.3 Disable USB Energy Saving Mode (Windows only)
If the TRAKTOR KONTROL X1 is performing poorly on a Windows machine, disable power
management to the USB hubs first; Windows XP turns this on by default.
To disable power management for USB hubs:
1. Open the device manager (Control Panel > System > Hardware).
2. Right-click a USB hub from the USB controller list to bring up its properties.
3. On the power management page, uncheck all boxes.
4. Repeat for each hub and reboot.
Troubleshooting
TRAKTOR KONTROL X1 Software Troubleshooting
TRAKTOR KONTROL X1 - Manual - 30