User Manual

3.6.3 Using the Stage (Drum Position)
Stage providing drum placement in the stereo field.
For
the Percussive Kits that have a Mixer, you will also have a Stage page. The Stage page
is an easy to use way of placing the drum in the recorded space by altering the gain and
pan of the three different channels for that drum.
To place a drum using the Stage all you need to do is…
1. Make sure the Stage is active by checking if the On LED at the bottom of the inter-
face is glowing.
2. If the Stage is not active, you can activate it by clicking on the On LED.
3. Next, select the drum you wish to position, either by hitting the corresponding MIDI
key or by clicking and dragging on the area labeled Key.
4. Finally, place the drum by clicking on one of the positions offered on the 7 by 5 ma-
trix of LED buttons.
You can place all of the drums to the same position at once by holding the alt key while you
click on the position LED.
Using the Instruments
Single Percussion Instruments
DAMAGE - Manual - 36