User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Introduction
- 2 Quick Start
- 3 Using the Instruments
- 4 Instrument Key Mappings
- 5 Credits
3.6.2 Using the Mixer
3 microphone position mixer on Main page.
For
most of the Percussive Kits you have three different microphone sources available to
you on three separate mixer channels. The output levels of each of these channels can be
changed using the faders provided on the Main Page. Below the Faders are Mute and Solo
buttons (marked with an M and S respectively) for each channel.
If you are sure you will not use one of the three channels for a project, you have a Purge
button which, when pressed, will unload the samples of that channel from RAM, saving
memory and improving performance. If you change your mind, you can always re-load the
samples by clicking on the button again.
Using the Instruments
Single Percussion Instruments
DAMAGE - Manual - 35