User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- 1 Introduction
- 2 Quick Start
- 3 Using the Instruments
- 4 Instrument Key Mappings
- 5 Credits
3.1.4 EQ & Filter Page
EQ/Filter page of the Rhythmic Suite.
As
mentioned in the Tabs chapter, all instruments have an EQ and Filter page, containing
a 3 band parametric EQ, a 4-pole lowpass filter, a 4-pole highpass filter and a PUNISH con-
trol. In all instruments you have access to these master effects, and for all except the Sin-
gle Loops you also have access to EQs and Filters per sound.
Parametric EQ
DAMAGE offers a 3-band, fully parametric EQ, which can be used to fine-tune the fre-
quency content of the instrument. To activate an EQ, just click on the LED button at the
bottom of the EQ controls. For the Single Loops this is labeled On, but for other instru-
ments there will be two LEDs one to turn on the global (Master) EQ that is applied to the
whole instrument, and one for the selected drum or loop, which is labeled accordingly.
Using the Instruments
Common Controls
DAMAGE - Manual - 25