User Manual

3 Using the Instruments
3.1 Common Controls
As
you may have noticed from earlier sections of the manual, certain controls are shared
between the different instrument types. These controls and their use will be described in
this section of manual.
3.1.1 Tabs & Basic Navigation
To
the top right of every instrument's performance view you will see three tabs. These are
used to navigate between the three different pages of controls for the instrument.
User Interface Navigation Tabs.
In
all instruments the first tab will be labeled MAIN and will take you to the Main page (the
first page you see when you open the instrument), which contains the general instrument
controls. The third tab is always EQ/FILTER and will take you to a page containing controls
for these effects. The second tab will differ depending on the instrument type:
▪
For the Loop Menus it is labeled T-FX and will take you to the Trigger FX control page.
▪
For the Single Loops it is labeled LOOP and will take you to the Loop Modifier page.
▪
For Percussive Kits with a mixer, it is labeled STAGE and will take you to the Drum Po-
sition control page.
▪ For all other Percussive Kits it has the same function and look as the Loop Menus.
3.1.2 Master Effects
On
the left side of the Main page you will find the master effects section of the instru-
ment. This area contains 5 different effects that you can turn on or off using the LED but-
ton to the right of the effect's name. You can also view the effect's controls by clicking on
its name. Each effect has four control knobs to help you shape the sound of the instru-
ment.
Using the Instruments
Common Controls
DAMAGE - Manual - 20