User Manual

Table Of Contents
Mouse/Keyboard Action Command
Double-click a Zone Extends the key and velocity ranges of the Zone so that it fits
the key and velocity limits of the neighbor Zones. This can be
very useful to quickly fill up any key or velocity gap between
Zones.
Right-click ([Cmd]-click on Mac OS X) a
Zone
Opens the Sample Map menu (see below).
Press [Del] or [Backspace] Removes the selected Zone(s) from the Sample Map.
You can also adjust the key and velocity ranges in the Zone settings at the bottom of the
Zone page. See section for a detailed description.
For more information on the Edit and Slice pages, please refer to section 14.3, Editing a
Sample and 14.4, Slicing a Sample, respectively.
Sample Map Menu
The Sample Map menu contains additional editing facilities.
Right-click ([Ctrl]-click on Mac OS X) a Zone to open the Sample Map menu.
The commands in the Sample Map menu will affect all selected Zones. The menu provides fol-
lowing commands:
Command Description
Delete Removes the selected Zone(s) from the Sample Map.
Map as Drum Kit Reduces the selected Zones to one note over the full velocity range and puts the
Zones next to each other upwards from the middle C (C3). The actual note as-
signed to each Zone depends on the Zone position in the Zone List: The topmost
Zone will be mapped to middle C (C3), the Zone underneath to C#3, etc.
14.5.6 Editing Zones in the Sample View
The Sample view is visible when the Sample View button (showing a little waveform icon at the
right of the Zone tab) is enabled.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO MK2 - Manual - 655