User Manual

To move Scenes:
1. Click and hold the Scene name (in the Arranger) or the Scene slot (in the Scene Manag-
er).
2. While holding the mouse button, drag your mouse horizontally (in the Arranger) or verti-
cally (in the Scene Manager) toward the desired location.
As the mouse cursor moves, an insertion line appears at the potential places where you
can drop the Scene.
3. When the insertion line appears at the desired location, release the mouse button.
→
The Scene takes its new place. On your controller in Scene mode, you can now select this
Scene via the pad corresponding to its new location.
In the Scene Manager, you can also:
▪ Drop the Scene slot onto another slot: the current Scene in that slot will be replaced (if
any).
▪ Drag a Scene from the pad grid (on the right) onto the slot list (on the left), and inversely!
13.2.8.1 Moving Scenes on the MASCHINE MIKRO MK2 Controller
To moves Scenes on your controller:
1. Press and hold SCENE to enter Scene mode (you can pin it by pressing CONTROL).
2. Press SHIFT + Left/Right Arrow buttons to select the Scene bank containing the Scene
you want to move.
3. Press the pad of the Scene you want to move.
4. Press the Left Arrow button to select the POSITION parameter at the bottom of the display.
5. Turn the Control encoder to move the selected Scene to another position in your arrange-
ment.
→
The Scene takes its new place. In Scene mode you can now select this Scene via the pad
corresponding to its new location.
13.2.9 Clearing Scenes
Clearing a Scene allows you to remove all its Clips, leaving the Scene empty. Clearing Scenes
is only available from within the software.
Creating a Song Using Scenes
Managing Scenes
MASCHINE MIKRO MK2 - Manual - 582