User Manual

Table Of Contents
Here we describe the procedure in Arrange view. You can also do this in Mix view see
section 8.1.2, Configuring the Main Output of Sounds and Groups.
You can repeat the process to route more Sounds/Groups to the same send effect, or route the
same Sound/Group to an additional send effect send using AUX 2.
11.3.2.1 Routing Audio to the Send Effect on the MASCHINE MIKRO MK2 Controller
1. Press the CONTROL button to enter Control mode.
2. If you want to route a Group’s output to the send effect, press F2 to select the GROUP tab,
if necessary press GROUP + Left/Right Arrow to select the bank containing that Group,
and press GROUP + the pad 916 of the desired Group.
3. If you want to route a Sound’s output to the send effect, press F3 to select the SOUND tab,
select the Sound’s parent Group as described in the previous step, and press SELECT +
the pad of that Sound (or simply press its pad if pads are in Group mode).
4. Press NAV + F2 (CHNL.) to access the Channel properties of the selected Sound/Group.
5.
While holding NAV, press pad 14 to select the Output properties (OUT).
6.
While holding NAV, press the Left/Right Arrow buttons to select the AUX page of parame-
ters.
7. Release NAV and the AUX page appears on the display.
8. Press the Left Arrow button (if necessary repeatedly) to select 1/6: DEST..
Using Effects
Creating a Send Effect
MASCHINE MIKRO MK2 - Manual - 491