User Manual

Table Of Contents
The Solo mode on the controller.
1. Press and hold SOLO to enter Solo mode. You can also pin this mode to make it perma-
nent (see section 2.3.5.1, Pinning a Mode on the MASCHINE MIKRO MK2 Control-
ler2.3.5.5).
2. Solo Sounds by pressing their pads, and solo Groups of the current Group bank by press-
ing GROUP followed by the desired pads 916.
The Mute mode on the controller.
1. Press and hold MUTE to enter Mute mode. You can also pin this mode to make it perma-
nent (see section 2.3.5.1, Pinning a Mode on the MASCHINE MIKRO MK2 Control-
ler2.3.5.5).
2. Mute Sounds by pressing their pads, and mute Groups of the current Group bank by
pressing GROUP followed by the desired pads 916.
In both Solo and Mute modes you will note that on your controller the unmuted pads and
Group buttons are fully lit while the muted ones are dim lit (and the empty ones are off).
In both modes the display provide a few more functions:
ALL ON (F1) turns all Sounds on in the selected Group.
NONE (F2) turns all Sounds off in the selected Group.
Playing on Your Controller
Playing Tools
MASCHINE MIKRO MK2 - Manual - 187