User Manual

▪ Monitor Status: Activating the direct monitoring routes the signal of the inputs 1 and 2 di-
rectly to the selected outputs (see Channel setting below) without sending them through
the computer, so you can monitor the input at zero latency.
▪ Channel: When direct monitoring is active, select to which output channels signals from in-
puts 1 and 2 will be routed.
5.1.2 Diagnostics Page
The Control Panel's Diagnostics page.
The Diagnostics page allows you to monitor performance and detect errors. The information
provided in this page is more of interest to advanced users; however, in case of problems with
the device, you should have a look at this page. The Diagnostics page consists of the four sec-
tions: Drop-Out Detection; Connection Monitor; System erformance Test; and Information. See
the following subchapters for further information on these sections.
Advanced Configuration
Advanced Configuration on Windows (Control Panel)
KOMPLETE AUDIO 6 - Manual - 27