User Manual

1. Press SHIFT + SCALE (Edit) to map the displays and knobs of the Control section to the
Scale engine parameters.
2. To select a scale, turn Knob 2 (BANK, by default set to MAIN) and Knob 3 (TYPE, by de-
fault set to MAJOR) until you find a scale you like.
3. To play the scale you selected, ensure that the SCALE (Edit) button is lit.
⇨ The keys on the keyboard are now mapped to the notes in the selected scale. The map-
ping is reflected visually by the Light Guide. Pressing any unlit key automatically activates
the nearest lit key so that only notes belonging to the selected scales are being played
back!
4. To map the knobs and displays to Instrument parameters again, press PLUG-IN. The
Scale engine will still be switched on.
If you selected Scale Type CHROM, all keys are lit.
15.4 Playing Chords
You can play chords in the usual way by pressing any number of keys simultaneously (or send
multiple MIDI notes simultaneously from the host), but KOMPLETE KONTROL also lets you
create and play chords by using Smart Play.
To play multiple notes in a chord simultaneously, the loaded Instrument must be able to handle
polyphony.
To play a chord by only pressing a single key on the keyboard, follow these instructions:
1. Press SHIFT + SCALE (Edit) to map the displays and knobs of the Control section to the
Scale engine parameters.
2. To activate Chord mode, set MODE to HARM by turning Knob 5 (by default set to OFF).
3. Define the intervals of your chord with the TYPE parameter by turning Knob 6 (by default
set to 1-3-5).
Playing and Editing Scales and Chords
Playing Chords
KOMPLETE KONTROL S-Series - Manual - 215