User Manual

4.5 Delete Mode
Delete mode can only be activated by continuously pressing the CAPTURE (DELETE) button. If
you stop holding the button, Delete mode will no longer be active. In other words, there is no
way to toggle Delete mode on and off. This is to prevent you from unintentionally deleting
Samples. The controls which are not affected by activating Delete mode are:
▪ The Filter knobs
▪ The Volume faders
In Delete mode, the following controls will be disabled, and their illumination state will be off:
▪ SYNC (MASTER)
▪ QUANT (EDIT)
▪ CAPTURE
▪ REVERSE (COLOR)
▪ TYPE (PITCH)
▪ SIZE (SPEED)
▪ BROWSE (MIDI)
▪ Mute (STOP)
4.5.1 Activating Delete Mode
To activate Delete mode:
►
Press and hold SHIFT, then press and hold the CAPTURE (DELETE) button.
Both buttons flash when Delete mode is active. In addition, the display changes to show the
current Sample Grid page, preceded by the letter "d." For example, "d3" indicates the third
page of the Sample Grid.
TRAKTOR KONTROL F1 Reference
Delete Mode
TRAKTOR KONTROL F1 - Manual - 96