User Manual

►
With Capture mode active, press and hold CAPTURE (DELETE), then press the encoder
knob. The new Sample will be placed in the first available Sample Cell.
The F1 determines the first available Cell by examining the Sample Grid, starting in the
top left of the first page and then checking each row from left to right, top to bottom.
If the first available Sample Cell is not located on the current (visible) page, the Sample Grid
automatically scrolls to the appropriate page and a pad animation will show the location of the
new Sample. The Sample Grid then scrolls back to the original position.
Note that Auto-Capture only works if there are empty Cells in the Sample Grid. If there
are no unoccupied Cells in the Sample Grid, Auto-Capture will not work and no new
Samples will be loaded.
4.4.9 Quick-Capturing Into a Cell
With Quick-capture, you can capture a new Sample with a minimal amount of button presses.
You don't have to switch the F1 into Capture mode with Quick-capture:
1. Press and hold the CAPTURE (DELETE) button.
2. While continuing to hold the CAPTURE (DELETE) button, hit the destination pad.
3. A new Sample will be created on the pad you specified using the capture source Deck's
Loop Size. You'll also see a pad animation, confirming the action.
4. If desired, press additional pads to capture more Samples, or release the CAPTURE (DE-
LETE) button to return the F1 to Performance mode.
4.4.10 Quick Auto-Capture
Quick Auto-capture combines Auto-capture with Quick-capture. To perform a Quick Auto-cap-
ture:
►
Press and hold the CAPTURE (DELETE) button, and then press the encoder knob.
Like Auto-capture, Quick Auto-capture places the captured Sample on the next available Sam-
ple Cell and will create a pad animation confirming the capture.
TRAKTOR KONTROL F1 Reference
Capture Mode
TRAKTOR KONTROL F1 - Manual - 95