User Manual

4.4.7 Capturing a Sample into a Cell
Capturing a Sample into a new Sample Cell is very easy:
1. Make sure Capture mode is active (CAPTURE (DELETE) button flashing).
2. If you want the Sample start to snap to the capture source Deck's Beatgrid, make sure the
Snap function (S) is active in the software's Main section. We recommend to always have
the Snap function active when capturing Samples.
3. Press the pad where you want the Sample to be captured to.
You'll see a quick pad animation to confirm that the Sample has been created. If the pad al-
ready contained a Sample, the old Sample will be replaced with the new one.
You can quickly and easily capture the same material into any number of Sample Cells
on the Remix Deck in rapid succession. This can be useful for capturing, say, a short
riff. You can then re-pitch the different pads (using TYPE (PITCH), see ↑4.8, Pitch
Mode), effectively creating a number of pitched variations of the same Loop.
The capture source Deck does not have to be playing in order to capture Samples into
the Remix Deck.
4.4.8 Auto-capturing a Sample
Auto-capture is a great way to very quickly populate your Remix Deck with captured Samples.
To perform Auto-Capture:
TRAKTOR KONTROL F1 Reference
Capture Mode
TRAKTOR KONTROL F1 - Manual - 94