User Manual

►
Briefly press the QUANT (EDIT) button to toggle the Remix Deck's Quantize.
Viewing the Current Quantize Value
If you press and hold the QUANT (EDIT) button for longer than one second, the F1 will tell you
the current Quantize Value in two different ways:
▪ On the 7-segment Display, you will see the Quantize Values of a quarter-beat (sixteenth-
note) to 32 beats; when the Quantize Value is between 1 and 32 beats, only the numbers
will show on the display. For lower values, a decimal point appears at the upper left corner
of the display followed by a number. For a half-beat (eighth-note) value, you'll see a "2"
preceded by a decimal point in the upper left corner of the display and for a quarter-beat
(sixteenth-note) value, a "4" preceded by a decimal point will be displayed.
▪ On the pads, you'll see a color pattern on the left half of the Pad Matrix (eight pads for the
eight possible values) with the current Quantize Value highlighted.
When you press and hold the QUANT (EDIT) button, the pad color pattern gives you an
intuitive way of seeing the Quantize Value: The first column of pads — from red to yel-
lowish-orange — represents the values that are less than one bar long. The second col-
umn — going from yellowish-green to green — show values that are one bar or longer.
Changing the Quantize Value
To change the Quantize Value of the Remix Deck with the F1, press and hold QUANT (EDIT)
for more than one second. The F1 will now display the current Quantize Value on both the
pads and on the 7-segment display (see above). While you continue to hold the QUANT (EDIT)
you can change the Quantize Value in either of two ways:
▪ Pads: The pads will show a color pattern corresponding to the Quantize Value. Pressing a
pad will select the value associated with that pad. The newly-pressed pad will become
bright, showing you that you have successfully changed the Quantize Value. You'll also see
the new value on the 7-segment display.
▪ Encoder: You can step through the different values by turning the encoder knob. As you
change values with the encoder knob, you'll also see the corresponding pads (representing
the Quantize Value) light up.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 72