User Manual

A Deck's SYNC button in the software.
When the Deck's Sync is engaged, the SYNC (MASTER) button (and therefore the correspond-
ing button on the software) will be lit up. When Sync is turned off (either by pressing the but-
ton on the F1 or by clicking on the SYNC button on the TRAKTOR GUI) the button will be un-
lit.
►
Press SYNC (MASTER) to toggle the Sync state of the Remix Deck.
Master
To find out if the Remix Deck controlled by your F1 is TRAKTOR's Master Deck or not, press
and hold SHIFT. The SYNC (MASTER) button will be lit if the Deck is set to Master, otherwise
the button will be unlit.
To toggle the state of the Remix Deck, hold SHIFT while pressing the SYNC (MASTER) button.
As with Sync, the state shown on the MASTER button on the TRAKTOR software and the state
shown on the SYNC (MASTER) when SHIFT is pressed (e.g., lit up or dim) are the same.
►
Press SHIFT + SYNC (MASTER) to toggle the Master state of the Remix Deck.
4.2.4 QUANT (EDIT) Button
The primary function of the QUANT (EDIT) button is to enable, disable, or change the value of
the Deck's Quantize characteristics. The secondary mode, which is the Edit mode, is activated
by pressing SHIFT + QUANT (EDIT). We will talk about the Edit mode separately in ↑4.11, Ed-
it Mode.
The QUANT (EDIT) button.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 70