User Manual

In this Manual, we always refer to the buttons with both mode names. The primary mode is
written without brackets, and the secondary mode with brackets. For example, the top-left but-
ton in the middle section of the F1 is the SYNC (MASTER) button. The secondary function
(Master mode) is always achieved by pressing SHIFT + the Mode button.
4.1.2 A Word on Sample Slot Parameters
Each Sample Slot has four parameters, which you can change directly with pads while pressing
SHIFT. The parameter names appear on both sides of the F1's Pad Matrix. The buttons are,
from top to bottom on the F1:
▪ KEYLOCK: Toggles the Keylock function so that a Sample Slot's pitch will not change when
speed is changed.
▪ FX: Engages or disengages routing the Sample Slot's sound through the effects assigned to
the Deck. See the TRAKTOR 2 Manual for further information on FX routing.
▪ MONITOR: Toggles headphone monitoring, independent of Sample Slot volume.
▪ PUNCH: Maintains musical phrasing when switching between Samples. Each Sample takes
over the playback position from the previous Sample with this parameter engaged, thus, al-
lowing you to "punch in" new Samples without having them play from their beginnings.
For more information on the Sample Slot parameters, please see ↑4.13, Sample Slot Pa-
rameters.
TRAKTOR KONTROL F1 Reference
Introduction
TRAKTOR KONTROL F1 - Manual - 64