User Manual

5. Push the encoder to load the Stem File into the Stem Deck.
6. Push the BROWSE button to leave Browse mode.
→
The Stem File is now loaded into the Stem Deck.
3.8.2 Controlling the Stem Deck
Compared to a Remix Deck where the playback is started as soon a Pad is triggered, you can-
not start the playback of the Stem Deck with the F1 controller.
Starting Playback
To start playback of the Stem Deck:
►
In the TRAKTOR software click Play of the Stem Deck.
→
The Stem File is now playing back similar to a conventional track in a Track Deck. During
playback you will notice the Pads light up indicating the output level volumes of the
Stem Parts.
Adjusting Volumes of Stem Parts
To adjust the volumes of key elements from the music:
►
Move the four Slot Volume Faders downwards or upwards.
→
You will hear the several volumes of key elements change. According to the Volume fad-
ers’ positions and the resulting output volume, the Pads will display the current output
volume level.
Muting Stem Parts
To completely remove key elements from the music:
►
Press the STOP (MUTE) buttons.
→
The volumes of the Stem Parts will be completely removed from the music and the Pads
of the Stem Channel are dimmed.
Tutorials and Workflows
Using F1 for Stem Deck Control
TRAKTOR KONTROL F1 - Manual - 57