User Manual

►
Press and hold the SHIFT button, and then press the first Mute (STOP) button from the
left to stop the Sample Slot and to reset the Sample start to its initial position.
Manual Loading
Many times you will want to load a Sample into a specific Cell:
1. Go back into Browse mode by pushing the BROWSE (MIDI) button.
2. Using the encoder knob, find and select the Sample "D1 Deep Verb Splash" in "All Sam-
ples."
3. Instead of pushing the encoder knob, we'll hit the pad where we want the Sample to go.
Let's take the last pad in the first row (pad D1), on the far right. After a quick Pad Matrix
animation, you'll see the chosen pad lit up dimly now, indicating that it contains a Sam-
ple, but is not yet playing.
4. Quickly escape Browse mode by pushing the BROWSE (MIDI) button, then hit the pad
you just loaded and then go back into Browse mode by pushing the BROWSE (MIDI) but-
ton again.
5. Let's fill in the drums a bit by adding some toms to our set.
6. While still in Browse mode, scroll to "B1 HiHat and Clap."
7. Hit the second pad in the top row (pad B1).
8. Leave Browse mode, hit the pad B1.
9. Hit pad A1 to add the "Intro Beat" Sample to the mix.
Switching Out Samples
You might not like the sound of the Verb sound on D1. Let's try out some other Samples, this
time on-the-fly so we can hear how things sound in context.
1. Enter Browse mode, the BROWSE (MIDI) button should then be blinking.
2. Move the encoder knob up or down the list and select another Sample. Let's say it's "C1
Bubble Gate."
3. Hit the pad currently playing the Verb Sample, D1, and it will be replaced.
Tutorials and Workflows
Making Your Own Remix Set
TRAKTOR KONTROL F1 - Manual - 47