User Manual

Emptying the Remix Deck
If you have a Remix Set already loaded, delete the Set the following way:
1. Push and hold SHIFT + CAPTURE (DELETE).
2. While continuing to hold the two buttons, rotate the encoder knob until you see "UL" (for
"UnLoad") on the display.
3. Push the encoder knob to delete the contents of the Remix Deck.
→
We now have a fresh Remix Deck. On the TRAKTOR software, you'll notice that the name
is "New Remix Set."
3.6.2 Loading Some Samples
For the purposes of this tutorial, we will limit our choice of Samples to the ones that are al-
ready in your Collection as a result of loading, playing, and repairing the "Remix Deck Tutorial"
as described in the previous section.
It is important to remember that all the manipulation you do to the Samples in a Remix
Deck (reverse, looping/one-shot, pitch and speed change, size change, and so on) are
only saved to the Remix Set. The Samples themselves are unaffected. This means that
you can have many different Remix Sets using the same Samples, but playing them
back at different speeds or pitches, and so on. The Remix Set itself takes up very little
space on your hard drive. It essentially recalls the states of each Sample loaded into it.
Automatic Loading
You have two ways of loading Samples with the F1. Let's try the automatic method first:
1. Push the encoder knob and the Sample will automatically load into the top left cell; the
pad on the F1 will be dimly lit to show you that the cell is loaded. If this cell is already
loaded, the next available cell will be loaded with the Sample.
2. Exit Browse mode by pushing the BROWSE (MIDI) button again.
3. Hit the pad that you just loaded and you should hear the Kick playing.
Tutorials and Workflows
Making Your Own Remix Set
TRAKTOR KONTROL F1 - Manual - 46