User Manual

3.5.7 Bad Speed
We're almost done fixing our tutorial Remix Set. There's one blatant problem with the second
pad in the last column (pad D2), sounds like popcorn — it's playing the Sample way too fast.
1. Make sure you are on page two (P2) of the Sample Grid.
2. Hit pads A2 to D2 to start the Remix Deck and the corresponding Sample Slots.
3. Press SHIFT + SIZE (SPEED). Both buttons start blinking.
4. Press and hold the speedy pad; the display shows "4" which means that the Sample is
playing back at four times the normal speed.
5. While continuing to press the pad, rotate the encoder knob two notches counterclockwise
so that the display shows "1." This means that the play back speed is 1x (normal playback
speed).
→
Congratulations! You have just repaired a number of wrongly set parameters in the tutori-
al Remix Set. You might want to take some time and practice making other changes to
the set before coming back to these tutorials.
3.6 Making Your Own Remix Set
Loading and tweaking Remix Sets is obviously very useful, but the idea is also to build your
own Remix Sets. In this tutorial, we are going to get you started on creating your own simple
Remix Set.
3.6.1 Preparations
Make sure that at least one of your Decks is set to Remix Deck. In this tutorial, we are going to
use Deck B, but you can use any of the four Decks you like. Also, if you own an S2 or X1 con-
troller, you might prefer to use one of the two upper Decks (A or B) because you have direct
control of the transport, and effects of these Decks with these two controllers.
►
Set the focus of the F1 on Deck B (see ↑3.3.2, Setting the Current Remix Deck Focus on
the F1), which should be an empty Remix Deck.
Tutorials and Workflows
Fixing the Second Page of the Sample Grid
TRAKTOR KONTROL F1 - Manual - 45