User Manual

Sample Play Type
There's one more playback problem in our page. In the last row, the second pad (B4) will only
play once when pressed, it won't loop! In the context of this Remix Set, that doesn't really fit;
we want this sound to keep looping once the pad is pressed.
1. Make sure you are on page two (P2) of the Sample Grid.
2. Hit pads A4 to D4 to start the Remix Deck and the corresponding Sample Slots.
3. To focus your ear on this Sample, mute all the other slots by pushing the Mute (STOP)
buttons in the first, third, and fourth Sample Slot so that we just hear the playback in the
second Sample Slot.
4. Press the second pad in the last row (pad B4). It plays through the Sample and then
stops. The pad turns dim white, indicating that the Sample is still armed to play, but it
has stopped playing after having been triggered.
5. Enter Type mode by pressing TYPE (PITCH). The button blinks.
6. Turn the encoder knob until the display shows "PL" (Sample Play Type).
All of the pads on the Pad Matrix except one turn green. The green pads are all looped,
whereas the blue pad indicates that the Sample will just play once (One-shot mode).
7. Press the lonely pad to toggle it to green (looped).
→
You have now switched the Sample Play Type from One-shot mode to Loop mode.
►
Bring back the other Sample Slots by pressing the Mute (STOP) buttons 1, 3, and 4 to
hear the effect.
When you are ready for the next step:
►
Press and hold the SHIFT button, and then press the four Mute (STOP) buttons below the
Pad Matrix one by one to stop all Sample Slots and reset all Samples to their initial posi-
tions.
Tutorials and Workflows
Fixing the Second Page of the Sample Grid
TRAKTOR KONTROL F1 - Manual - 44