User Manual

3.3.2 Setting the Current Remix Deck Focus on the F1
If you have more than one Deck set as a Remix Deck, you can quickly switch between Remix
Decks with the F1 by changing its Deck focus:
1. Press and hold the SHIFT button.
2. While continuing to hold SHIFT, turn the encoder knob to the left or right one notch —
the Pad Matrix is divided into 2x2 squares, and the square representing the current Remix
Deck begins to flash. At the same time, the 7-segment display indicates the current Deck:
"dA" is Deck A, "dB" is Deck B, and so on.
3. As you continue holding SHIFT, keep turning the encoder knob to skip from one Remix
Deck to another until you land on Deck B, which is the one we want to control. Each
notch on the encoder knob will move to another Deck, if more Remix Decks are available.
If there is no Deck set to the Remix Deck Flavor, then the F1's 2x2 quadrants will not
light up.
4. Release the SHIFT button.
Tutorials and Workflows
Preparations
TRAKTOR KONTROL F1 - Manual - 28