User Manual

Each tick of the encoder knob moves the value up or down one semitone. The maximum pitch
range is +/- 12 semitones.
If Keylock is not enabled in the Slot, turning the encoder knob (to change pitch) will au-
tomatically enable it so that the pitch change can take effect.
4.8.3 Resetting the Pitch Value of a Sample
To reset the pitch setting of a Sample — in other words, to bring the pitch change back to
zero:
1. Hold the pad to be reset and press the encoder knob.
2. The Display will update to show "0" for the pitch value. Release the pad, and if desired,
hold another pad to repeat the process.
4.9 Size Mode
Size mode lets you change the playable area of a Sample by moving the Sample end marker.
To make musical sense, the movement of the marker is constrained so that the length of the
playable area is always in multiples (or divisions) of 2 with respect to the full length of the
Sample. For example, possible lengths are: full length, 1/2 length, 1/4 length, 1/8 length, and
so on, or larger lengths like 2x length, 4x length, and so on.
Press the SIZE (SPEED) button to enter Size mode.
When Size mode is active, the following controls remain enabled:
▪ Filter knobs
▪ Volume faders
▪ Mute (STOP) buttons
TRAKTOR KONTROL F1 Reference
Pitch Mode
TRAKTOR KONTROL F1 - Manual - 110