User Manual

SIZE (SPEED)
BROWSE (MIDI)
In order for Pitch mode to work, make sure Keylock is enabled for the Slot (4.13.3,
Keylock).
4.8.1 Activating Pitch Mode
To activate Pitch mode:
Press and hold SHIFT, then press and release TYPE (PITCH).
When Pitch mode is active, both the SHIFT and the TYPE (PITCH) buttons will blink on and
off.
You can exit Pitch mode by pressing both the SHIFT and TYPE (PITCH) buttons or by pressing
TYPE (PITCH) button alone.
Activate Pitch mode by pressing SHIFT and TYPE (PITCH).
4.8.2 Setting the Pitch with the Encoder
To change the pitch of a Sample:
1. Enter Pitch mode by pressing SHIFT + TYPE (PITCH).
2. Press and hold the pad you wish to change you'll see the current pitch value on the
display.
3. While holding the pad, turn the encoder knob clockwise to raise the pitch or counter-
clockwise to lower the pitch.
4. Release the pad and press and hold another pad to repeat the process, if desired.
TRAKTOR KONTROL F1 Reference
Pitch Mode
TRAKTOR KONTROL F1 - Manual - 109