User Manual

Fig. 15-31 — Play and Record buttons in the Loop Recorder
The Loop Recorder will punch in (Record button lit) and out (Record button back off) ac
cording to the selected loop size and then begin playing (Play button lit). That’s all!
You can hear that our adjustments to the EQ are now part of the recording.
You’ll notice that the loop automatically started playing when it finished recording. If you
don’t want this to happen, just push the Play button during recording. Now the loop will only
trigger when you explicitly tell it to.
Playing with the Recorded Loop
You can control the balance between the looped recording and the main output using the
Loop Recorder’s DRY/WET knob:
Fig. 15-32 — The Loop Recorder’s DRY/WET knob
You can stop and start again the recorded loop by using the Play button. By doing this,
you’ll notice the following:
▪ The Loop Recorder always stays in sync the current tempo master, which is Deck B at
the moment in our example.
▪
You don’t have to bother with the
DRY/WET
knob position when stopping the Loop Re
corder. When you stop the Loop Recorder, the
DRY/WET
knob is automatically bypassed
regardless of its current position. This ensures a seamless transition with the main sig
nal at its original level.
Tutorials
Using the Loop Recorder (TRAKTOR PRO 2 / TRAKTOR SCRATCH PRO 2 Only)
TRAKTOR 2 - Application Reference - 253