User Manual

▪ Aux will pick up the signal assigned to TRAKTOR’s Aux channel—typically the micro
phone input (for more info on how to use a microphone, please see chapter ↑18.6,
Adding a Microphone).
If you’re using TRAKTOR SCRATCH PRO/DUO 2 and are therefore in External Mixing mode,
the only available option is Ext.
For our example, we’ll capture the main output:
► Select Main in the Source menu.
15.9.2 Recording a Loop
Let’s now record a loop.
Adjusting the Loop Size
Before we start recording, we need to specify the size of the loop we are going to record:
► Press the SIZE button repeatedly to cycle through loop record sizes (in beats).
You can see the current loop size at the top of the Loop Recorder. For our example, we’ll
choose a loop of 4 beats:
Fig. 15-30 — The selected loop size is displayed in the software.
Starting the Recording
Now do the following:
► Cut the low and mid frequencies on channel B by turning the LO and MID knobs fully
counter-clockwise.
► Turn the DRY/WET knob of the Loop Recorder fully clockwise.
When you’re ready, press the Record button.
Tutorials
Using the Loop Recorder (TRAKTOR PRO 2 / TRAKTOR SCRATCH PRO 2 Only)
TRAKTOR 2 - Application Reference - 252