User Manual

Fig. 15-26 — The sample SFX Gold 1 in One-shot mode
When you click on this little blue arrow, it turns into a little green loop. The sample is now
in Looped mode. In Looped mode, you can control its playback as follows:
► Press the Sample Play button to start the playback.
→ The sample is played in loop.
► Press the Sample Play button again to stop the sample and skip back to start.
In case you don’t hear the playing (unmuted) sample, check that channel C’s fader is raised.
Also, the crossfader must be set somewhere on the left. Indeed, all this happens on Deck C
(which is a Sample Deck); hence, your sample’s signal is controlled by channel C on the
Mixer.
15.8.3 Grabbing a Sample from a Track
We have seen how you can load samples directly into one of the Sample Decks using
TRAKTOR’s Browser, but here’s an even cooler performance feature:
1. Check that the track Techno 2 is still playing on Deck B). If the playback has reached
the end of the track, press the to Skip Back to Start button, alternatively press [Shift]
+G on your computer keyboard.
2. Make sure that Snap mode is activated in the Master panel of the Global section.
3. Set a Loop in this track using the controls in the Loop section as described in chapter
↑15.6.1, Playing with Loops.
Tutorials
Using Samples in Your Mix (Not Available in TRAKTOR LE 2)
TRAKTOR 2 - Application Reference - 247