User Manual

Table Of Contents
At the bottom of the Mixer, verify that the crossfader is moved all the way to the left:
Above, the channel fader should be raised on channel A:
The channel meter (the vertical bar of indicators along the channel fader, see picture
above) should show some activity. If not, check that the HI, MID, LOW and FILTER knobs
higher up on that channel are set to center position; at the top of the channel, double-
click the GAIN encoder once to reset the channel’s input gain to 0 dB.
Tutorials
Playing Your First Track
TRAKTOR 2 - Application Reference - 215