User Manual

◦ The 7 available values are expressed in fractions of bars, and are equally distribut
ed over the range of the knob. The knobs position is displayed in bold letters: Min
⇨ Max: 4/4, 3/8, 1/4, 3/16, 1/8, 1/16, 1/32.
The effect rate can be switched during operation without any crackles or glitches in audio!
▪
FRZ (Freeze): Freezes the Delay by closing the input and turning up the Feedback to max
imum value. The filter remains active in the feedback loop. For endless freezes, the
FILTER knob has to be therefore turned down to full left position.
Even in Freeze mode the Delay follows the Master Clock and will therefore seamlessly merge
into the mix once released.
▪
FB+ (Feedback): Raises the feedback to 90%.
Group Mode (1-Knob Control)
The knob works like the RATE knob in Single effects mode with a predefined duration of 2
Bars.
14.4.34
Auto Bouncer
The Auto Bouncer is a buffer-based effect that captures snippets of 1 beat and repeats
them based on 5 predefined patterns.
Single Mode
▪
TRANS (Transpose): Adjusts transposition of the repetitions. When turned from center to
right the transposition will increase as it follows the pattern. When turned from center
to left the transposition will decrease as it follows the pattern.
▪
BEND: Increases and decreases the repetitions. When turned from center to right the
speed will decrease by progress of the pattern. When turned from center to left the
speed will increase by progress of the pattern.
▪
PATTERN
: The 5 available patterns are numbered 0-4.
▪
X2
: Doubles the Density of repetitions.
▪
ALT
: Activates alternative patterns 0-4.
Group Mode (1-Knob Control)
The knob works like the BEND knob in Single effects mode.
Advanced Operation of TRAKTOR
The Effects in Detail
TRAKTOR 2 - Application Reference - 207