User Manual

▪
FBK (Feedback): Controls the strength of the delay’s feedback, making the effect stronger
and more colorful.
▪
SPEED: Controls the speed of the Tape Delay.
The effect rate can be switched during operation without any crackles or glitches in audio!
▪
FRZ (Freeze): Freezes the Delay by closing the input and turning up the Feedback to max
imum value. The filter remains active in the feedback loop. For endless freezes, the
FILTER knob has to be therefore turned down to full left position.
Even in Freeze mode the Delay follows the Master Clock and will therefore seamlessly merge
into the mix once released.
▪
ACCL: Activates a higher acceleration of the virtual tape speed.
Group Mode (1-Knob Control)
This knob works like the ACCL knob in Single effects mode.
14.4.33
Ramp Delay
Creative delay with adjustable transition time between different delay rates.
Single Mode
▪
FILTER: Bipolar control for controlling both the lower and higher cutoff frequency. Pass
es the entire band in center position. Progressively cuts frequencies from high to low,
when turned from center to the left. Progressively cuts frequencies from low to high,
when turned from center to the right.
▪
DURATION:
◦ Controls the length of the delay ramp. The ramp defines how long the delay takes
to transition between different delay rates.
◦ The 7 available values are expressed in fractions of bars, and are equally distribut
ed over the range of the knob. The knobs position is displayed in bold letters: Min
⇨ Max: 1/4, 2/4, 4/4, 2 BARS, 4 BARS, 8 BARS, 16 BARS.
▪
RATE
:
◦ Controls the speed of the Ramp Delay.
Advanced Operation of TRAKTOR
The Effects in Detail
TRAKTOR 2 - Application Reference - 206