User Manual

▪
FEEDB (Feedback): Controls the amount of feedback in the effect ranging from 0 to
100%. With zero feedback in full left position, the effect behaves like regular tube dis
tortion.
▪
DRIVE (Overdrive): Controls which of the two overdrive units is fed and by how much.
Drives only one unit in full left and full right position and morphs between them when
in between.
▪
FB- (Inverted Feedback): Only passes uneven harmonics, making the effect sound deep
er in frequency.
Group Mode (1-Knob Control)
This knob behaves like the DRIVE knob in Single Effect mode.
At high DRIVE and FEEDB values the effect can produce sound even without any input.
14.4.28 Transpose Stretch
The Transpose Stretch is a classic Pitch-Shifter with additional Grain-Size and Time-
Stretch control.
Single Mode
▪
STRCH (Time Stretch): As soon as the knob is moved away from full left position, the
input is recorded for 1 bar (2 if the button “Tx2” is pressed) and then is endlessly loop
ed and played back. The more the knob is moved to the right, the more the time is
stretched until the music comes to a complete stop on a single “Grain”.
The STRCH knob has to be in full left position to open the input of the effect. The effect must
be loaded with the STRCH knob in full left position!
▪
GRNSZ (Grain Size):
◦
This knob only works when the GRN button below is enabled, and controls the size
of the grains. Otherwise the grain size is automatically linked internally for best
overall pitching.
◦ It ranges from large grains (333 ms) in full left position to short grains (5 ms) in
full right position.
◦ Very small sizes can lead to nice FM/ring modulating metallic sounds. Also try
starting at “full stop” and then transpose to max for metallic “moaning” sounds.
Advanced Operation of TRAKTOR
The Effects in Detail
TRAKTOR 2 - Application Reference - 203