User Manual

Single Mode
▪
SOFTEN: Controls the smoothness of the cutoff envelope. The more the knob is turned to
the right, the softer the filter sweeps will be.
▪
RES: Controls the resonance of the filter. High resonance makes the filter sound colorful
and more noticeable. Min: low resonance, Max: high resonance.
▪
AMT:
◦ Controls the frequency where the filter action takes place. Compared to a regular
filter, the filter frequency is modulated by the peaks in the music resulting in a dy
namic pattern of filter sweeps.
◦ In center position the modulation is neutral, to the right the modulation goes up
wards and to the left the modulation goes downwards.
▪
P.SN (Peak Sensitivity): Raises the threshold for the peak envelope follower from 50%
to 80%.
▪
P.MD (Peak Mode): This enables Peak Sensitivity (see above).
14.4.17 Filter:92
This Filter is modeled after the filters on Allen & Heaths Xone:92 mixer.
Single Mode
▪
HP (High Pass):
◦ Controls the low cutoff frequency.
◦ Passes the entire band in full left position (bypass).
◦ Progressively cuts frequencies from low to high when turned to the right.
▪
RES: Controls the resonance of the filter. High resonance makes the filter sound colorful
and more noticeable. Min: low resonance, Max: high resonance
▪
LP
(Low Pass):
◦ Controls the high cutoff frequency.
◦ Passes the entire band in full right position (bypass).
◦ Progressively cuts frequencies from high to low when turned to the left.
▪
BRJ
(Band Reject): Switches the filter to Band Reject mode. In this mode the frequen
cies between the two cutoff frequencies are eliminated rather than passed through.
▪
DJM
(DJ Mode):
◦
Switches the panel to 1-knob filter control. The
LP
knob becomes a bipolar control
for controlling both the lower and higher cutoff frequency.
◦ Passes the entire band in center position.
Advanced Operation of TRAKTOR
The Effects in Detail
TRAKTOR 2 - Application Reference - 196