User Manual

Group Mode (1-Knob Control)
The knob behaves like the AMNT knob in Single mode.
14.4.14 Filter
Classic filter with 2-knob and single knob control modes, based on ladder filter architec
ture.
Single Mode
▪
HP (High Pass):
◦ Controls the low cutoff frequency.
◦ Passes the entire band in full left position (bypass).
◦ Progressively cuts frequencies from low to high when turned to the right.
▪
RES: Controls the resonance of the filter. High resonance makes the filter sound colorful
and more noticeable. Min: low resonance, Max: high resonance
▪
LP (Low Pass):
◦ Controls the high cutoff frequency.
◦ Passes the entire band in full right position (bypass).
◦ Progressively cuts frequencies from high to low when turned to the left.
▪
BRJ (Band Reject): Switches the filter to Band Reject mode. In this mode the frequen
cies between the two cutoff frequencies are eliminated rather than passed through.
▪
DJM (DJ Mode):
◦
Switches the panel to 1-knob filter control. The LP knob becomes a bipolar control
for controlling both the lower and higher cutoff frequency.
◦ Passes the entire band in center position.
◦ Progressively cuts frequencies from high to low when turned from center to the left.
◦ Progressively cuts frequencies from low to high when turned from center to the
right.
In DJ Mode (DJM) the LP knob is labeled LP/HP and has a combined function to control both
low-cut and high-cut frequencies.
Group Mode (1-Knob Control)
The knob controls the effect in DJ mode and behaves like the LP/HP knob in Single mode.
Advanced Operation of TRAKTOR
The Effects in Detail
TRAKTOR 2 - Application Reference - 194