User Manual

▪
FEEDB (Feedback): Controls the strength of the delay’s feedback, making the effect
stronger and more colorful. Min: low feedback, Max: strong feedback.
▪
RATE: Controls the Delay time. The 7 available values are expressed in fractions of bars,
and are equally distributed over the range of the knob. Min — Max: 1/32, 1/16, 1/8,
3/16, 1/4, 3/8, 4/4.
The Rate knob continues to work in Freeze mode and allows interesting mash-ups. It is im
portant, though, to turn the knob down to low values only briefly because otherwise the buf
fer will empty.
The effect rate can be switched during operation without any crackles or glitches in audio!
▪
FRZ (Freeze): Freezes the Delay by closing the input and turning up the Feedback to
maximum value. The filter remains active in the feedback loop. For endless freezes,
the FILTER knob has to be therefore turned down to full left position.
Even in Freeze mode the Delay follows the Master Clock and will therefore seamlessly merge
into the mix once released.
▪
SPRD (Stereo Spread): Creates an offset between the delay times of the left and right
channel giving the effect of spatial depth. The Delay times are: L Min — Max: 1/32,
1/16, 1/8, 3/16, 2/4, 3/8, 4/4 R Min — Max: 1/32, 1/8, 3/16, 3/8, 3/8, 2/4, 4/4.
Group Mode (1-Knob Control)
The knob works like the RATE knob in Single mode at a medium Feedback value.
14.4.5 Reverb
Classic Reverb with extreme room sizes, individual low and high pass filter controls, and
Freeze function.
Single Mode
▪
HP: High Pass filter in the effect loop — fully open when turned to the left.
▪
LP: Low Pass filter in the effect loop — fully open when turned to the right.
▪
SIZE: Controls the size of the added reverb, ranging from small to vast room sizes.
▪
FRZ (Freeze): Freezes the Reverb by closing the input and leaving the output open.
Advanced Operation of TRAKTOR
The Effects in Detail
TRAKTOR 2 - Application Reference - 187