User Manual

Fig. 13-11 The Load Buttons setting
Following options are available:
▪
Load Track (default): Pressing LOAD loads the selected track on the Deck when using
Quick Loading; pressing SHIFT + LOAD unloads the track from the Deck.
▪
Jog Mode: Pressing LOAD activates/deactivates a special Jog mode for the jog wheel. You
can choose from two different Jog modes in the underlying Jog Mode Select menu:
.
◦ FX: The jog wheel controls the FX parameter 3 in Hold mode in the FX Unit right
above: when releasing the jog wheel, the parameter snaps back to its previous val
ue.
◦ Filter: The jog wheel controls the channel’s FILTER knob in Hold mode: when re
leasing the jog wheel, the filter snaps back to its previous value.
If a Jog mode is activated, you can still load a track on the Deck by pressing SHIFT + LOAD
(of course, you can also load tracks via the Browse mode).
Jog Wheel: The Disable Jog Wheel Push option will defeat the touch-sensitivity of the
TRAKTOR KONTROL S4 Jogwheels when checked. If this option is checked, you will not
be able to perform normal scratching techniques because TRAKTOR will no longer check
if you’re pressing the jog wheel or not. The wheel will then behave as a Tempo Bend at all
times (like when rotating the wheel from its outside edge).
Fig. 13-12 By default, this option is unchecked.
Restore Default
The Restore Default section holds only one element: the Restore button.
Fig. 13-13 The Restore button
Preferences
Traktor Kontrol S4
TRAKTOR 2 - Application Reference - 173