User Manual

13.8 Transport
Tempo
Set Tempo Range: Set a global tempo range for all Tempo Faders or set a range for each
Deck individually. This will define the maximum amount you can increase or decrease
tempo. The available values are 2%, 4%, 6%, 8%, 10%, 12%, 14%, 16%, 18%, 20%,
25%, 35%, 50% and 100%.
If you choose a range of 100% you are able to perform a full stop of a track with TRAK
TOR’s software Tempo Fader.
Tempo Fader Range not available in TRAKTOR DUO and TRAKTOR LE 2.
Tempo Bend Sensitivity
You can adjust the sensitivity of the Tempo Bend function by moving the Tempo Bend Sensi
tivity slider.
To increase the sensitivity of the Tempo Bend control, move the Tempo Bend Sensitivity slider
to the right; to decrease it, move the slider to the left.
The value range of the slider is 0–200%.
► To speed-up or slow-down the tempo progressively, tick the Tempo Bend Progressive Sensitivi
ty button.
Sync Mode
There are two methods for synchronizing tracks: TempoSync and BeatSync.
▪ TempoSync: maintains tempo-only synchronization between the tracks. The phase of
the Decks will be aligned when the SYNC button is turned on and SYNC will turn dim if
the phase of the Decks are shifted. Tempos will remain synced in this mode.
▪ BeatSync: forces tempo and phase synchronization between the tracks. The phase of
the Decks will be aligned when the SYNC button is turned on. SYNC will turn dim if the
phase of the tracks are shifted manually (i.e. Scratching or holding a Deck in the stop
ped position), but TRAKTOR will re-align the phase of the tracks when the Deck plays
normally again (i.e. you release the record or jog wheel).
Preferences
Transport
TRAKTOR 2 - Application Reference - 149