User Manual

Table Of Contents
7.5 FILTER, KEY and Effect Insert
Fig. 7-4 Mixer with Filter, Key and Effect Insert.
This chapter provides information on basic concepts and functionalities of the
FILTER
knob,
the KEY knob and the Effect inserts (FX knobs).
(1) FILTER: The FILTER knob provides a bipolar filter.
In center position, the filter is inactive.
Turning the knob to the right activates a high-pass-filter. The more you move it to the
right, the more low and middle frequencies are cut out.
Turning it to the left activates a low-pass-filter. The more you move it to the left, the
more high and middle frequencies are cut out.
In Preferences > Mixer > Filter Selection you can choose between Xone:92, emulating
Allen & Heath’s Xone Series filters, and Filter for a regular Ladder filter.
(2) Effect Insert: The two (or four) Effect Insert buttons in each channel insert the effect
units into the signal chain.
You can insert all Effect Units in one channel.
You can insert the same Effect Unit in more than one channel.
You can insert an Effect Unit on all channels to simulate a Master Effect.
The Internal Mixer & the Crossfader
FILTER, KEY and Effect Insert
TRAKTOR 2 - Application Reference - 105