User Manual

Besides, all channels currently routed to the Cue bus for pre-listening are mixed together and
sent to the Cue output.
For more information on how to use the Cue bus, see section ↑13.2.6, Using the Cue Bus.
You can choose to which outputs (on your audio interface or in your host) both Master and Cue
outputs should be sent, and adjust their respective levels and panoramic positions. This is
done on the Audio page of the Output properties for the Master.
The Audio page of the Output properties for the Master in the software.
Please refer to section ↑3.3.5, Navigating Channel Properties, Plug-ins, and Parameter Pages in the
Control Area to know how to access the Audio page of the Output properties in the software and
from your controller.
Controls Description
AUDIO Section
Output Selects where you want to send the master output of your
MASCHINE Project. Available options are the 16 external stereo
outputs Ext. 1–16.
Level Adjusts the overall volume level of the master output. This control
is the same as the Master Volume slider in the Header, at the top
right corner of MASCHINE’s window.
Pan Defines the panoramic position of the master output in the stereo
field.
CUE Section
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 502