User's Manual

© National Instruments Corporation C-1 NI-DAQ FRM for PC Compatibles
Appendix
C
NI-DAQ Function Support
This appendix contains tables that show which DAQ hardware each
NI-DAQ function call supports.
The NI-DAQ functions are listed in alphabetical order. A check mark
indicates the hardware that the function supports. If you attempt to call an
NI-DAQ function using a device that the function does not support,
NI-DAQ returns a
deviceSupportError
.
Table C-1 lists the NI-DAQ functions for MIO and AI devices. Table C-2
lists the NI-DAQ functions for the Lab/516/DAQCard-500/700 devices.
Table C-3 lists the NI-DAQ functions for the DSA devices. Table C-4 lists
the NI-DAQ functions for the Analog Output device family. Table C-5 lists
the NI-DAQ functions for the Digital I/O device family. Table C-6 lists the
NI-DAQ functions for the PC-TIO-10 device. Table C-7 lists the SCXI
functions used with SCXI modules and compatible DAQ boards.
Table C-1.
MIO and AI Device Functions
Function
Device
Non-E Series AT-MIO AI E Series PCI-6110E and PCI-6111E MIO E Series
AI_Change_Parameter
✓
AI_Check
✓ ✓ ✓ ✓
AI_Clear
✓ ✓ ✓ ✓
AI_Configure
✓ ✓ ✓ ✓
AI_Mux_Config
✓ ✓ ✓ ✓
AI_Read
✓ ✓ ✓ ✓
AI_Read_Scan
✓ ✓ ✓
AI_Setup
✓ ✓ ✓ ✓