Network Device User Manual

Appendix A Specifications

PXIe_SYNC_CTRL

.......................................................... 2.0–5.5 V

.......................................................... 0–0.8 V

PXI Star Trigger

Maximum slot-to-slot skew ................... 250 ps

Backplane characteristic impedance ...... 65 Ω ±10%

Note For PXI slot to PXI Star mapping refer to the System Timing Slot section of

Chapter 1, Getting Started.

For other specifications refer to the PXI-1 Hardware Specification.

PXI Differential Star Triggers (PXIe-DSTARA,

PXIe-DSTARB, PXIe-DSTARC)

Maximum slot-to-slot skew ................... 150 ps

Maximum differential skew ................... 25 ps

Backplane differential impedance.......... 100 Ω ±10%

Note For PXIe slot to PXI_DSTAR mapping refer to the System Timing Slot section

of Chapter 1, Getting Started.

For other specifications, the NI PXIe-1065 complies with the PXI-5 PXI Express

Hardware Specification.

Mechanical

Overall dimensions

Standard chassis

Height ...................................... 6.97 in. (177.1 mm)

Width ....................................... 18.30 in. (464.8 mm)

Depth ....................................... 18.40 in. (467.4 mm)

Note 0.57 in. (14.5 mm) is added to height when feet are installed. When tilted with front

feet extended on table top, height is increased approximately 2.08 in. (52.8 mm) in front

and 0.583 in. (14.8 mm) in rear.