- PXI-8170 Series User Manual

Appendix A Configuring the PXI-8170 Series
PXI-8170 Series User Manual A-2 www.ni.com
Figure A-1. System CMOS
LCD Resolution and Enable
The LCD output resolution can be switched between 640 × 480 and
800 × 600 or no LCD. Figure 3-6 shows the LCD resolution options.
See Chapter 4, BIOS, for information about updating the BIOS to enable
LCD support.
Figure A-2. LCD Resolution Setting
Keyboard and Mouse
Two switches—S1 and S2—control whether to enable the PS/2 keyboard
and mouse ports on the front panel of the PXI-8170 controller or the
built-in chassis devices, if available. By default, both front panel ports are
enabled. Change S1 to use a chassis keyboard port and S2 to use a chassis
mouse port.
Note Only the PXI-1020 and PXI-1025 chassis currently have built-in PS/2 devices that
you can select in this manner.
W1
a. Normal Operation (default) b. Clear CMOS Contents
W1
1
3
5
2
4
6
1
3
5
2
4
6
on
off
1234
No LCD (default)
on
off
1234
640 × 480
on
off
1234
800 × 600
S3 S3 S3