User Manual Camera PCI-1428

© National Instruments Corporation A-1 IMAQ PCI-1428 User Manual
A
Specifications
This appendix lists the specifications of the PCI-1428. These specifications
are typical at 25 °C, unless otherwise stated.
External Connections
Trigger sense.......................................... TTL
Trigger level........................................... Programmable (rising or falling)
Pixel clock.............................................. Camera Link compatible
Enables ................................................... Camera Link compatible
Control signal......................................... Camera Link compatible
Video data .............................................. Camera Link compatible
Clocks
Pixel clock frequency range................... 20 to 50 MHz
Note Camera Link cameras must transmit at a minimum of 20 MHz.
1
PCI Interface
PCI initiator (master) capability............. Supported
PCI target (slave) capability................... Supported
Data path ................................................ 32 bits
Card type ................................................ 32-bit half-size card
Parity generation/checking,
error reporting ........................................ Supported
1
This value corresponds to the post-serialization Camera Link cable transmission rate of 140 to 350 MHz.