User manual

© National Instruments Corporation A-1 NI 5620 User Manual
A
Specifications
This appendix lists the specifications of the NI 5620. These specifications
are typical at 25 °C unless otherwise specified.
General Specifications
Number of channels ............................... 1
Resolution .............................................. 14 bits
Max sample rate ..................................... 64 MS/s (also integer
divisions of 64 MS/s)
Onboard memory
Using DDC (complex data) ............ 8 MS
Not using DDC ............................... 16 MS
Input
Signal level
Nominal .......................................... 0 dBm (±0.316 V)
Full-Scale ........................................ +10 dBm (±1.000 V)
Max with dither enabled ................. +9 dBm (±0.891 V)
Max non-operating input level........ +20 dBm (±3.16 V)
Max DC input voltage..................... ±2 V
Input impedance..................................... 50 Ω
Coupling................................................. AC
Fully specified frequency range............. 5 to 25 MHz
Analog bandwidth (–3 dB range)........... 25 kHz to 36 MHz